Application of a Second-Order Kinetic Model to a Complex Melt Polymerization Reaction

A novel copolymer system has been synthesized using methyl hydroquinone diacetate (MHQDA), 1,4 naphthalene dicarboxylic acid (1,4 NDCA), and polybutylene terephthalate (PBT) using the melt polymerization technique. The optimum kinetic parameters pertinent to this system are reported in this study. A simple second-order reaction sequence summarizes catalyzed and uncatalyzed reactions between MHQDA, 1,4 NDCA, and PBT. The kinetic parameters for the copolymerization reaction were determined using a new second-order model. This technique was used to compute the moles of acetic acid generated in the polymerization process. The model was compared to that of the experimentally determined data. Close comparison (percentage error of less than 5%) was obtained between the experimental and theoretical data. The kinetic data support block copolyester formation. The thermal data also supports formation of block polymers.     

气相色谱法测定固定污染源废气中氯甲基甲醚和二氯甲基醚的研究

氯甲基甲醚(CMME)和二氯甲基醚(BCME)属于确认人类致癌物,因此,建立精准、绿色的CMME和BCME检测分析方法十分必要。基于2,4,6-三氯苯酚+乙醇钠+乙醇衍生化体系,利用气相色谱法(电子捕获检测器)测定了固定污染源废气中的CMME和BCME,并且系统地优化了采样条件、衍生化条件,确定了衍生化产物的结构及衍生比率。结果表明：工作曲线相关系数均大于0.990;当采样量为10 L时,检出限均为0.003 mg/m³;当实际样品加标量分别为0.010、0.100、1.00 mg/m³时,测定结果的相对标准偏差分别为15%～16%、8.9%～13%、10%～11%,加标回收率分别为89.2%～90.8%、75.3%～78.6%、76.5%～77.2%。     

十溴联苯醚在单次暴露的孕和非孕SD大鼠血液内的吸收分布

五溴联苯醚、八溴联苯醚被禁以后,十溴联苯醚（BDE-209〉97%）是现在唯一仍在全球范围内广泛使用的多溴联苯醚阻燃剂。BDE-209在环境介质和生物体,甚至人体的血液、母乳中普遍存在,而且BDE-209的环境含量呈上升趋势。在实验室条件下,BDE-209可以通过生物代谢,或光降解、热降解转换形成毒性更强的低溴代PBDEs、羟基甲氧基PBDEs、致癌物多溴二苯并二噁英/呋喃（PBDD/DFs）。所以BDE-209的环境行为及生物效应成为环境污染物领域研究的热点之一。目前,关于BDE-209对妊娠期生物体的暴露研究还是很少。研究了十溴联苯醚在单次暴露的孕和非孕SD大鼠血液内的吸收代谢。结果表明,BDE-209可以被孕和非孕SD大鼠吸收,孕和非孕SD大鼠血液中吸收的BDE-209都可以快速的排出。BDE209在孕和非孕SD大鼠体内存在脱溴代谢,主要的脱溴代谢物是3种nona-BDE（sBDE-206,-207,-208）和五种octa-BDEs（BDE-196,-197/204,-198/203）,其中3种nona-BDEs是主要的代谢物,而BDE-207是nona-BDEs中含量最大的单体。BDE-209及其脱溴代谢物nona-BDEs的清除速率,在SD孕鼠的体内快于SD非孕鼠,而且在暴露实验的后期还存在统计意义的显著差异性。     

Development of inherent safety and health index for formulated product design

The numerous formulated products which are introduced to the market consist of chemical ingredients that may cause various safety and health hazards to the consumers. Therefore, it is extremely important to practice a systematic methodology to formulate products with acceptable safety and health performances. This work presents an index-based methodology to assess the safety and health hazards of the ingredients during the early formulation stage of product design. Hence, new inherent safety and health sub-indexes are introduced to improve the current safety and health hazards that are needed in formulated product design. The inherent safety and health sub-indexes are assigned with scores based on the degree of potential hazards. A higher score indicates a higher safety risk or severe health effect, and vice versa. The proposed methodology will greatly assist the users to identify the adverse safety and health effects caused by the ingredients. Hence, it is pivotal to eliminate or reduce the safety and health impacts from product usage. A case study on common ingredients used in the formulation of paint is presented on this study to describe the proposed method.     

网状聚合物冠醚对重金属离子的吸附性能

以Hg（NO3）2、Cu（NO3）2水溶液为模拟工业废水，以侧链具N、S配位基的网状聚合物冠醚为吸附剂，研究了聚合物冠醚对HP(2＋)、Cu(2＋)的吸附性能。讨论了溶液温度、pH值、金属离子浓度及时间对吸附性能的影响，该聚合物冠醚对Hg(2＋)具有较高的吸附容量和较快的吸附速度。     

空气中联苯——联苯醚的气相色谱法测定

以国产硅胶担体为固体吸附剂,采集空气中联苯-联苯醚。经热解吸、制冷、闪蒸后,用气相色谱法测定。实验结果,在常温下,国产硅胶对联苯-联苯醚的吸附率达100％;解吸回收率为97.5％:变异系数<5％;方法的检测限为0.4μg。     

固定化微生物法处理含甲硫醇恶臭气体

采用液相曝气方式驯化培养污水厂活性污泥，获得具有降解甲硫醇能力的优势微生物菌群。同时用海藻酸钠包埋固定化微生物，研究固定化微生物颗粒填充床去除甲硫醇恶臭气体的工艺过程。液相曝气培养研究表明：降解甲硫醇的微生物菌群适宜的ｐＨ值为５．２～９．０，最佳ｐＨ条件为弱碱性。已驯化微生物的离心浓缩回收率为７１．２％，颗粒填充床生物脱臭塔运行实验表明：在空塔停留时间不大于１３ｓ，对低浓度甲硫醇气体（〈１２．９ｍ     

Fe/Si/TiO2三元复合光催化剂的性能研究

用溶胶-凝胶法制备了Fe/Si/TiO2三元复合光催化剂,利用X射线衍射(XRD)和紫外-可见漫反射光谱(DRS)对样品进行了分析表征,并以甲基橙为模拟污染物,考察了其光催化活性.结果表明,Fe/Si/TiO2三元复合光催化剂与TiO2相比,光催化活性明显提高;当煅烧温度为900℃、添加Fe的摩尔分数为0.050%时,光催化活性最佳.     

甲基叔丁基醚的污染治理技术研究进展

甲基叔丁基醚(MTBE)是一种无铅汽油添加剂,其广泛使用造成了土壤和地下水污染;同时对人类有可疑致癌作用,因此成为人们关注的焦点.对近年来国外MTBE的污染治理技术研究进展进行了综述,并对主要方法进行了对比.在适宜的微生物存在条件下,MTBE的生物降解是可以发生的;植物修复技术可用于地下水和土壤污染治理;物理化学方法种类繁多,包括吸附和高级氧化等,其处理效率高成本也较高;新的处理技术如渗透性活性障壁PRB、膜分离/催化技术等也在研究之中.     

甲基叔丁基醚降解菌的驯化与筛选

为了筛选降解甲基叔丁基醚(MTBE)的优势菌种,调查了不同来源土壤土著菌的降解潜力.应用不同的驯化方式以MTBE为惟一碳源,在好氧的条件下,驯化、筛选出高效降解混合菌株,为现场应用打好基础.并从中分离得到6株高降解性的单一菌株,对其进行了初步鉴定,为进一步研究其降解途径做好准备.对单一菌株与混合菌株的降解效果进行了比较.结果表明,混合菌株的降解效果要明显高于单一菌株.